Home Back Our Customers Used UPS

photo: APC Silcon three phase UPS

APC Silcon PDF Brochure

APC Silcon

Rating: 10-500KW / KVA 3 Phase,  Power Factor Rated in KW,  Input/Output 480/208 Vac, 60Hz for Domestic models.

Delta Conversion On-line Technology supplies clean 3-phase power to critical applications, datacenters and facilities, regardless of power failures.  Features include: SNMP Ready for Manageability, PowerChute Network monitoring, Software configurable features, Intelligent Battery Management, Environmental Protection, Event logging,  parrellel output for capacity or redundancy, extendable Run Time available. Input Power Factor Correction, Intelligent Battery Management, 200% overload capability, Audible Alarms, Built-in static bypass switch, LCD Alphanumeric Display, Overload Indicator, Paralleling Capability, Sine-wave output, SmartSlot, Software, Web Management

 

Over the past three years, more and more computer manufacturers have built Power Factor Corrected (PFC) power supplies into their servers. In order to avoid unnecessary wear and tear on computer components, the Volt-Amps (VA) requirements of all the computers that make up the load need to equal the Watts (W) capacity of the UPS. The Silcon Series units are PFC compliant.  Unlike Double conversion UPS systems that must be derated for KW, the APC Silcon UPS is designed with KVA equaling KW.

APC Copyright Notice

CALL 972-484-8151 or Toll Free 888-566-1615

Email Us at Pro@LEDpowerPRO For Assistance

 

Contact Us   |   About LED Enterprises, Inc.   |   Search   |

Send mail to powerpro@ledpowerpro.com with questions or comments about Power Quality Products, Services, or this web site.
Copyright 2001 LED Enterprises, Inc.
  Privacy Notice      Conditions of Use